diff options
Diffstat (limited to 'home/.config/gamemode.ini')
| -rw-r--r-- | home/.config/gamemode.ini | 90 |
1 files changed, 0 insertions, 90 deletions
diff --git a/home/.config/gamemode.ini b/home/.config/gamemode.ini index 899cc4c..d6a5189 100644 --- a/home/.config/gamemode.ini +++ b/home/.config/gamemode.ini @@ -1,97 +1,7 @@ [general] -; The reaper thread will check every 5 seconds for exited clients, for config file changes, and for the CPU/iGPU power balance reaper_freq=5 - -; The desired governor is used when entering GameMode instead of "performance" desiredgov=performance -; The default governer is used when leaving GameMode instead of restoring the original value defaultgov=performance - -; The iGPU desired governor is used when the integrated GPU is under heavy load -; igpu_desiredgov=powersave -; Threshold to use to decide when the integrated GPU is under heavy load. -; This is a ratio of iGPU Watts / CPU Watts which is used to determine when the -; integraged GPU is under heavy enough load to justify switching to -; igpu_desiredgov. Set this to -1 to disable all iGPU checking and always -; use desiredgov for games. -; igpu_power_threshold=0.3 - -; GameMode can change the scheduler policy to SCHED_ISO on kernels which support it (currently -; not supported by upstream kernels). Can be set to "auto", "on" or "off". "auto" will enable -; with 4 or more CPU cores. "on" will always enable. Defaults to "off". softrealtime=off - -; GameMode can renice game processes. You can put any value between 0 and 20 here, the value -; will be negated and applied as a nice value (0 means no change). Defaults to 0. renice=0 - -; By default, GameMode adjusts the iopriority of clients to BE/0, you can put any value -; between 0 and 7 here (with 0 being highest priority), or one of the special values -; "off" (to disable) or "reset" (to restore Linux default behavior based on CPU priority), -; currently, only the best-effort class is supported thus you cannot set it here ioprio=0 - -; Sets whether gamemode will inhibit the screensaver when active -; Defaults to 1 -; inhibit_screensaver=1 - -[filter] -; If "whitelist" entry has a value(s) -; gamemode will reject anything not in the whitelist -;whitelist=RiseOfTheTombRaider - -; Gamemode will always reject anything in the blacklist -;blacklist=HalfLife3 -; glxgears - -[gpu] -; Here Be Dragons! -; Warning: Use these settings at your own risk -; Any damage to hardware incurred due to this feature is your responsibility and yours alone -; It is also highly recommended you try these settings out first manually to find the sweet spots - -; Setting this to the keyphrase "accept-responsibility" will allow gamemode to apply GPU optimisations such as overclocks -;apply_gpu_optimisations=0 - -; The DRM device number on the system (usually 0), ie. the number in /sys/class/drm/card0/ -;gpu_device=0 - -; Nvidia specific settings -; Requires the coolbits extension activated in nvidia-xconfig -; This corresponds to the desired GPUPowerMizerMode -; "Adaptive"=0 "Prefer Maximum Performance"=1 and "Auto"=2 -; See NV_CTRL_GPU_POWER_MIZER_MODE and friends in https://github.com/NVIDIA/nvidia-settings/blob/master/src/libXNVCtrl/NVCtrl.h -;nv_powermizer_mode=1 - -; These will modify the core and mem clocks of the highest perf state in the Nvidia PowerMizer -; They are measured as Mhz offsets from the baseline, 0 will reset values to default, -1 or unset will not modify values -;nv_core_clock_mhz_offset=0 -;nv_mem_clock_mhz_offset=0 - -; AMD specific settings -; Requires a relatively up to date AMDGPU kernel module -; See: https://dri.freedesktop.org/docs/drm/gpu/amdgpu.html#gpu-power-thermal-controls-and-monitoring -; It is also highly recommended you use lm-sensors (or other available tools) to verify card temperatures -; This corresponds to power_dpm_force_performance_level, "manual" is not supported for now -;amd_performance_level=high - -[supervisor] -; This section controls the new gamemode functions gamemode_request_start_for and gamemode_request_end_for -; The whilelist and blacklist control which supervisor programs are allowed to make the above requests -;supervisor_whitelist= -;supervisor_blacklist= - -; In case you want to allow a supervisor to take full control of gamemode, this option can be set -; This will only allow gamemode clients to be registered by using the above functions by a supervisor client -;require_supervisor=0 - -[custom] -; Custom scripts (executed using the shell) when gamemode starts and ends -;start=notify-send "GameMode started" -; /home/me/bin/stop_ethmining.sh - -;end=notify-send "GameMode ended" -; /home/me/bin/start_ethmining.sh - -; Timeout for scripts (seconds). Scripts will be killed if they do not complete within this time. -;script_timeout=10 |